Moog-music Slim Phatty User Manual download pdf (Page 38)

Page 40

Slim Phatty User’s Manual - The User Interface

Page 41

Slim Phatty User’s Manual - The User Interface

The Arpeggiator provides a wide range of musical sequencing pos-

sibilities. The Arpeggiator is programmed for each preset individually

through the seven menu pages described here. The Arpeggiator is

activated from the front panel (see Activating the Arpeggiator and Latch,

page 52). To enter the Arpeggiator Menu, use the CURSOR to highlight

‘ARPEGGIATOR’ and press ENTER.

ARPEGGIATOR:

When you enter the Arpeggiator menu, the top line of the display

changes to indicate that you are now programming the Arpeggiator.

The rst page of the Arpeggiator Menu allows you to enable the

arpeggiator function for the chosen preset. When ‘ON’ is selected,

the arpeggiator is ‘armed’ and ready to be switched on from the front

panel. When ‘OFF’ is chosen, the arpeggiator will remain off, prevent-

ing you from switching it on accidently. To change the Enable status, use

the CURSOR to move to the ON/OFF parameter eld, then use the

VALUE knob to select the desired setting.

The second page of the Arpeggiator menu allows you to select the

Arpeggiator Clock Source. There are three possible clock sources:

INT - The Arpeggiator Clock

LFO - The SP’s Low Frequency Oscillator

MIDI - An externally applied MIDI Clock

When ‘INT’ is selected as the clock source, the Arpeggiator runs from its

own internal clock. In this mode, when the Arpeggiator is switched ON

the Arpeggiator Clock rate is adjusted either with the MODULATION

knob, or by using the Tap Tempo function, or by issuing a MIDI CC#90

command. Note that you must select the LFO RATE switch when the

Arpeggiator is ON in order to use the MODULATION knob to change

the Arpeggiator Clock rate (the MODULATION control does not ad-

just the speed of the LFO when the Arpeggiator is running).

When ‘LFO’ is selected as the clock source, the Arpeggiator is driven

from the Low Frequency Oscillator. In this mode, the MODULATION

knob adjusts the speed of the Arpeggiator Clock and the LFO Rate

together, making it possible to get synchronous, arpeggiated LFO effects.

When ‘MIDI’ is selected as the clock source, the Arpeggiator is driven

from an externally applied MIDI Clock. In this mode, the MIDI Clock

synchronizes the Arpeggiator to the sending device (a software

DAW, for example). Note that if no MIDI Clock signal is present, the

Arpeggiator will not run and no notes will be heard.

NOTE: For additional details, see Appendix B – Arpeggiator Clock Source.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 74 75

Comments to this Manuals

No comments

Moog-music Slim Phatty User Manual Page 38

Comments to this Manuals

Related products and manuals for Musical Instruments Moog-music Slim Phatty